![Auline 21700 40T 4000mAh 6S 35A 22.2V Li-ion Battery XT60 [DG]](http://sg.fpvfaster.com/cdn/shop/files/1_43a5bc61-5c71-4c1e-9f7c-fbcd7f2fcccc_300x300.jpg?v=1705964615)
GEPRC TAKER F405 BLS 65A V2 Stack 30.5x30.5mm
Features
- Use mainstream STM32F405 chip
- Equipped with the latest 42688-P gyroscope
- 16M black box storage
- Integrated LC filter
- Upgrade type-C USB interface
- Directly plugged into the DJI Air Unit
- With TAKER H65_8S_BLS 65A 4IN1 ESC, the flying feel is silky
- Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
- 12V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F405-HD V3 Flight Controller
- MCU：STM32F405
- IMU：ICM42688-P(SPI)
- Air Unit Connection：Direct plugging into DJI Air Unit
- Black Box：16M onboard
- Barometer: support
- Motor outputs：M1-M6
- USB Interface：Type-C
- OSD：BetaFlight OSD w/ AT7456E chip
- BEC：5V@3A,12V@2.5A dual BEC
- Firmware Target：GEPRCF405
- Size：37.15×37.15mm
- Mounting: 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle
- Input Voltage：3-6S LiPo
- UART：6 UARTs
- Power Filter：Integrated LC filter
- Weight：7.3g
TAKER H65_8S_BLS 65A 4IN1 ESC
- Input Voltage: 3-8S Lipo
- Ammeter: Support
- Continue Current：65A
- Burst Current：70A（5 second）
- Support Protocol: Dshot 150/300/600
- Size：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
- Weight: 14.9g
- Target: B_X_30
Includes
- 1 x Flight Controller
- 1 x ESC
- 1 x Capacitor
- 1 x DJI Air Unit Adapter Cable
- 1 x Flight Controller Adapter Cable
- 1 x XT60 Power cable
- 4 x M3*30 Screws
- 4 x M3*25 Screws
- 8 x Nylon nuts
- 8 x Silicone grommets
- 2 x sh1.0 4pin silicone cable
- 1 x Camera connection cable
![Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]](http://sg.fpvfaster.com/cdn/shop/files/Xnip2024-07-30_14-30-56_600x600.jpg?v=1722313885)
